Palsonic CRT Television 8010PF User Manual

OWNER'S MANUAL  
PURE FLAT HI-VISION STEREO TELEVISION  
80CM CORDLESS REMOTE COLOUR TELEVISION  
MODEL: 8010PF  
Type Tested  
Electrical  
Safety  
AS/NZS 3250 Lic 4166  
Standards Australia  
APP No: N15900  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL:(02)9313 7111  
FAX:(02)9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA:1300 657 888  
 
Main features  
.
80cm Pure Flat picture tube  
.
.
PAL/NTSC/SECAM Multi - System  
Hyperband  
.
CHINESE/ENGLISH on-screen menu display  
.
Surround sound and wide-field dynamic sound system  
.
NICAM Digital Stereo/bilingual broadcasts receivable  
.
German Stereo (IGR) /bilingual broadcasts receivable  
.
Three groups of S-VIDEO/VIDEO/AUDIO input terminals and one group of MONITOR  
output terminals  
.
Auto/manual search  
.
OFF timer and ON timer, Auto-Power-Off & blue background display  
.
Advanced 6D picture improvement circuit  
1. Digital Color Transient Improver (CTI)  
Enhance the tint and make the original picture brighter and fresher  
2. 3H digital comb filter  
To attain the complete separation of brightness and colour signals. To reduce colour  
interface, blurry and dotted interruptions. To make the picture clearer.  
3. Digital Luminance Transient Improver (LTI)  
Adopts the digital delay line and achieves the outline correction. To make the picture  
clearer and better definition.  
4. Black level stretch circuit  
To extend the dynamic scope of the picture.  
5. Scan Velocity Modulation & white peak suppressed circuit  
To enhance lines and borders-between bright and dark images. To improve the focus of the  
picture white peak and white characteristics, to make the picture and letters brighter and  
clearer.  
6. Dynamic Focus  
To optimize the focus of electron beams in the CRT. To improve the picture sharpness  
especially in the comers of the screen and achieve the perfectness of picture finally.  
1
 
NOTES FOR OPERATION  
* Do not let the TV set be in standby condition for a long period of time. When it is not in use,  
please turn off the power supply and remove the power plug. When it is to be left for a  
prolonged period of time, it is recommended to disconnect the connection to the outdoor  
aerial, to avoid thunder strike.  
* Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted  
on the TV set.  
Cautions For Safety  
Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power  
supply of the other type.  
When an unusual situation  
In order to wipe dust off the  
occurs, turn off the power  
switch at once and remove the  
plug from the wall outlet.  
Contact a qualified service  
department in your local area.  
picture tube or off the cabinet,  
you should remove the power  
plug from the wall outlet first.  
You can wipe lightly with a  
piece of dry, clean, soft cloth.  
The TV set should be placed  
on an adequate place without  
exposing it to direct sunlight  
and other sources of heat to  
prevent the deformation of the  
cabinet or damage to  
Do not expose the TV set to  
rain or excessive moisture, to  
prevent tire disaster or  
electric shock. Avoid using  
the set in very warm or damp  
places. Never use it in a  
bathroom.  
components.  
Do not cover the Ventilating  
holes in the cabinet. Keep a  
space of more than 5 cm from  
the walls to the TV set, to  
There exists High Voltage in  
this TV set. Do not remove  
the cover to avoid danger.  
guarantee the good ventilation.  
When the power cord or the  
plug is damaged, please  
contact a qualified service  
department to get service.  
When the TV set is to be left  
unattended, please turn off the  
power switch and remove the  
plug from the wall outlet.  
2
 
Installation and appearance  
Antenna connection  
To ensure a bright - coloured and clear picture, you should use an outdoor aerial or CATV  
cable. If the signals are strong enough, you may use an indoor aerial.  
Note: In case of using the  
Twin-lead aerial feeder (300 )  
for UHF/VHF aerial, use a 300-75  
ohm adaptor (not supplied)  
When using the coaxial cable (not  
supplied) (75 ) for UHF/VHF  
aerial, connect the plug into the  
75 ohm aerial socket directly.  
Note:  
When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off  
the power switch on the TV while connecting the antenna lead.  
In thunder and lightning, weather, please disconnect the connection to the outdoor aerial to avoid  
thunder/lightning strike.  
Battery Installation:  
Effective range of the remote control  
operation  
1) Remove the back battery cover.  
2) Insert two size AAA batteries according to  
the polarity indication inside the remote  
controller.  
Note:  
1. When the remote controller is not used for  
an extended period of time or the batteries  
are worn out, please remove the batteries in  
time to avoid battery leakage.  
2. Avoid moisture and mechanical shock to the  
remote controller.  
3
 
Appearance  
Front view  
POWER SWITCH  
(3) Video 3 input terminals  
{S-VIDEO, VIDEO,  
AUDIO L/MONO, R}  
Note: Functions of MENU, AV, SYS, CH  
to the remote controller.  
, VOL+/- are also provided  
Back view  
CHANNEL DOWN  
CHANNEL UP  
MENU  
TV/AV  
SYSTEM  
MONITOR output terminals  
{VIDEO, AUDIO L/MONO, R}  
Antenna input  
(2) Video 2 input terminals  
{S-VIDEO, VIDEO, AUDIO L/MONO, R}  
(1) Video 1 input terminals  
{S-VIDEO, VIDEO, AUDIO L/MONO, R}  
4
 
The Remote Controller  
5
 
Operation  
Switching on/off  
Push the main power switch on, if the set is in Standby mode, the power indicator is red;  
If there are pictures appearing on the screen, the indicator is yellow.  
If no picture appears on the screen, push the power button on the remote controller to  
turn the set on, the indicator turns to yellow.  
1.  
2.  
Without using the remote controller, you can push any of the VOLUME + / - , CH  
or VIDEO button to turn on the TV.  
Note: If there are no input signals to the TV when the TV is on, a blue background will  
appear on the screen. After 15 minutes if there are still no signals to the TV, it will  
enter into standby mode automatically.  
Push the main power switch to turn off the set.  
If you want to turn off the TV temporarily, push the  
3.  
4.  
button on the remote controller to  
switch the set to standby mode, the indicator turns to red.  
Special indication:  
Last-Mode-Memory: after turning off the power, the last TV mode picture and sound  
setting mode and preset channels all are memorised. Therefore, the next time you turn on  
the TV, the TV will work in the previous setting mode.  
.
.
If you directly pressed the main power switch on the TV to turn it off, you must press the  
main power switch to turn on the TV .  
If you pressed the main power switch to turn off the TV when in standby mode, press the  
main power switch and then operate from the remote controller to turn the TV on.  
Auto-Power-off function: there are two kinds of Auto-Power- Off function:  
1. If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically  
turn off after about 15 minutes.  
2.  
OFF - timer function. However, if the OFF-timer is operating, it takes precedence, that  
is, the function of Auto-Power-Off, if no signals received will be ineffective.  
6
 
Presetting the channels  
Press the MENU button to  
display the main menu  
There are two ways to preset channels: to preset  
channels automatically and to preset channels manually.  
Below we will describe how to preset the channels  
by making use of the menu.  
MENU  
1. To enter into menu  
1.1 Press the MENU button to enter into the main  
menu.  
Press the or button  
to select SEARCH  
1.2 Press menu item select button or to select  
SEARCH  
MENU  
1.3 Press the  
SEARCH  
or  
button to enter into the sub-menu of  
SEARCH  
Press the or button  
to display the sub-menu  
of SEARCH  
Note:  
The MENU button refers to the MENU button on  
the remote controller or on the TV set, the or  
button refers to the or button on the re-  
SEARCH  
mote controller or CH  
on the TV  
MANUAL SEARCH  
AUTO SEARCH  
set, the or button refers to the  
button on the remote controller or the VOLUME  
+ / - button on the TV set.  
or  
Press the button to  
select AUTO SEARCH  
2. AUTO SEARCH  
2.1  
Press the menu item select button or to select  
AUTO SEARCH (the caption on the screen  
is red).  
AUTO SEARCH  
Press the or button  
it begins searching autom  
atically  
2.2 Press  
or button, the TV begins to search TV  
channels automatically. All active channels will be  
preset and stored into the memoriser automatically.  
After presetting, the TV will return to the first  
channel program.  
12 VHFH  
lllllllllllll  
Before auto - search begins, you had better press  
"SYS" button to set the current sound system to  
B/G and the colour system to "AUTO" .  
Note:  
After presetting is finished  
it returns to the first chan-  
nel  
1
7
 
Press the or button  
to select MANUAL  
SEARCH  
3. MANUAL SEARCH  
If AUTO-SEARCH cannot preset the desired channels,  
or you want to preset the desired channels one by  
one with the preferred channel numbers - please make  
use of MANUAL SEARCH.  
SEARCH  
MANUAL SEARCH  
AUTO SEARCH  
Press the menu item select button or to select  
MANUAL SEARCH (the caption on the screen are  
red).  
3.1  
3.2  
Press the or button  
to display the menu of  
MANUAL SEARCH  
Press the  
or  
button to enter into the sub-menu  
of MANUAL SEARCH.  
MANUAL SEARCH  
3.3 Press the or button to choose POSITION.  
(the caption on the screen are red), press the  
or  
button to select the needed program number (from  
00 ~ 99.  
Press the or button  
to select SEARCH  
Note:  
Push the  
or  
button to select a channel number  
or  
within 0.7 of a second. Push and hold the  
MANUAL SEARCH  
button for more than 0.7 of a second to select a  
decimal number.  
Press the  
or button to select SEARCH, push  
3.4  
the  
button to search channels from current channel  
Press the  
select the wanted channel  
number  
button to  
to higher channel. Push the  
button to search  
channels from current channel to lower channel.  
When a channel is located, the searching stops, this  
channel is then memorised with a present channel  
number.  
POSITION 22  
Note:You can also make use of band selection to quicken  
the searching process in your desired band. Pressing  
Press the button  
select SEARCH  
the  
or button moves the band to the next step  
in the sequence below.  
SEARCH  
UHF  
VHFH  
VHFL  
Press the button  
it begins searching  
When a station is searched  
the searching stops  
POSITION 22  
SEARCH  
SEARCH  
8
 
3.5 When you want to store and memorise another channel  
with another position, repeat steps 3.3, 3,4.  
MANUAL SEARCH  
POSITION 14  
4. Skip unwanted program numbers  
After presetting the channels, you can skip unwanted  
program numbers to select your desired channels.  
Press the button to  
select SKIP  
4.1  
4.2  
Repeat steps 3.1 to 3.3 to select the unwanted  
program position of the unwanted channels .  
SKIP OFF  
Press the or button to select SKIP. Press the  
of  
After completion of the channel presetting, when you  
press the CH button to select channel, the  
button to select SKIP ON.  
Press the  
select SKIP  
or button  
unwanted channels will be skipped.  
If you want to skip other unwanted channels, repeat  
step 4.1 above to change the channel numbers.  
SKIP ON  
If you want to restore the skipped program numbers,  
do step 4. 1 to select these program numbers, then  
MANUAL SEARCH  
POSITION 10  
press the  
or  
button to select SKIP OFF.  
5. Manual Fine Tuning  
Press the button to  
select MFT  
When sound and picture's effect of a channel is poor  
(for example: one or two CATV channel's sound and  
picture are not standard), you can correct by the use of  
Manual Fine Tuning.  
MFT  
5.1  
5.2  
Repeat steps 3. 1 to 3.3 to select the channels you  
want to manually fine tune.  
Press the  
begins fine tuning in  
direction.  
button it  
Push the or button to select MFT, then press  
or  
button, the channel begins to search until  
the optimum picture and sound is achieved.  
Note:  
If some channel's colour or sound is abnormal, it  
may be that the setting of the colour or the sound  
system is wrong, please do the following step 6 to  
set the colour and sound system.  
MFT  
- - - - -  
llllllllllllll  
After finishing the preset operation, press the  
MENU button repeatedly until the "on - screen"  
display disappears and exits from the main menu.  
Press the MENU button  
repeatedly until on-screen  
display menu disappears  
9
 
Press the SYS button  
6. The setting of colour and sound system  
6.1 Press the SYS button, the screen will display colour and  
sound system.  
SYSTEM  
COLOR AUTO  
6.2  
If the displaying colour is abnormal, press the or button  
to select COLOUR, then press the or button to select  
the right colour system. Every time you press or button,  
the colour system will change in the sequence on the right.  
AUTO  
PAL  
SECAM  
NTSC 4.43  
NTSC 3.58  
6.3  
If the sound is abnormal, press the or button to select  
SOUND, then press the or button to select the right  
sound system. The sound system will change in the sequence  
on the right:  
D/K  
I
M
B/G  
Now you can watch the broadcasting TV program at the  
preset channel.  
Channel selection  
Press the - / - - button  
- -  
You can select your desired TV program by one of the following  
methods.  
Making use of the direct select buttons 0 ~ 9 and - /- -  
To select a one - digit channel, press - /- - button to display  
" - " on the upper right corner of the screen, then directly  
press a number button of 0 ~ 9. To select a two-digit channel,  
press the - / - - button to display "- - " on the upper right  
corner of the screen, then press the number buttons. The  
hannel range is 0 ~ 99.  
1.  
Press the 0 ~ 9 button  
10  
2. Making use of the CH  
button  
Press the CH button, the channel number will increase pro-  
gressively. Press the CH button, the channel number will  
decrease progressively.  
2
3. Making use of the  
button  
Press the  
channel. For example, the channel you previously watched is  
2, the present channel is 8, press the button, it will return  
to channel 2, press the button it will return to channel 8.  
button, it can switch back quickly to the previous  
Press the  
button  
8
10  
 
Sound mode selection  
If the broadcasting TV station is transmitting high quality two-channel digital sound  
(NICAM) to be added to the already existing FM sound, or transmitting a second FM sound  
with an identification signal to be added to the already existing first FM sound (IGR), in the  
upper right corner of the screen will display an indication for several seconds which is listed  
in the following table. You can press the " " button repeatedly to select sound source.  
On - screen display and sound source  
Sound transmitting mode  
"FM MONO"  
FM mono sound  
"FORCE FM"  
FM MONO  
Only one FM channel transmitting mono sound  
1
2
FM mono sound  
"STEREO"  
FM stereo sound  
"FORCE FM"  
first FM sound  
FM STEREO  
two FM channels transmitting stereo sound  
FM DUAL  
two FM channels transmitting dual language  
"DUAL 1"  
language 1  
"DUAL 2"  
3
4
language 2  
NICAM MONO  
FM MONO  
"NICAM MONO"  
digital mono sound  
"FORCE FM"  
FM mono sound  
one digital sound channel  
transmitting mono sound  
one FM sound channel  
(The sound signal in FM  
channel is same as the  
one in NICAM channel. So  
when the NICAM is trans-  
mitting, on the TV set auto-  
matically switches to high  
quality digital sound chan-  
nel).  
NICAM STEREO  
two digital sound channels  
transmitting stereo sound  
"STEREO"  
digital stereo sound  
"FORCE FM"  
FM mixed sound  
5
6
NICAM DUAL  
two digital sound channels  
transmitting dual sound  
"DUAL 1"  
language 1 digital  
"DUAL 2" "FORCE FM"  
language 2 digital  
language 1 FM  
"NICAM MONO"  
"FM MONO"  
"NICAM MONO"  
(In yellow. Only for indication)  
NICAM MONO  
one digital sound channel  
transmitting mono sound  
FM MONO  
7
8
9
FM mono sound  
digital mono sound  
"STEREO"  
FM mono sound  
"FM MONO"  
FM mono sound  
one FM sound channel  
(The sound signal in FM  
channel is different from the  
one in NICAM channel. So  
when the NICAM is trans-  
mitting on the TV screen  
only displays an indicatior  
in yellow, while the active  
sound channel is FM).  
"STEREO"  
(In yellow. Only for indication)  
NICAM STEREO  
two digital sound channels  
transmitting stereo sound  
FM mono sound  
digital stereo sound  
NICAM DUAL  
"DUAL"  
(In yellow.  
Only for indication)  
"DUAL 1"  
"DUAL 2"  
"FM MONO"  
language 3  
two digital sound channels  
transmitting dual sound  
language 3  
language 1  
language 2  
If you experience loud noise in digital sound channel because of the weak signal,  
please press the " " button to set the sound mode to "FM MONO" or "FORCE FM", thus to  
select FM sound channel. In "FORCE FM” mode, the TV set no longer automatically searches  
"NICAM: or "IGR" signals.  
11  
 
Picture and sound adjustment  
Press the  
|
button, you can quickly select two  
modes of picture and sound quality standard:  
One is standard mode ( on the screen displays  
(STANDARD);  
STANDARD  
The other is personal select mode (on the screen  
displays "MEMORY").  
Press the  
|
button  
1. Picture adjustment  
MEMORY  
Complete the following steps and you will adjust the  
picture quality.  
1.1 Press the MENU button, on the screen will dis-  
play the main menu, press the or button to  
Press the MENU button  
to display the main menu  
select PICTURE, then press  
or  
button to  
enter into the sub-menu of PICTURE  
1.2 Press or the button to select the items you  
want to adjust (the caption on the screen is red),  
MENU  
PICTURE  
then press the  
or  
button to adjust the level of  
picture control amount.  
Press the  
or button  
to display the menu of  
PICTURE  
Standard  
Mode  
Adjustment  
item  
Pressing (Memory mode)  
PICTURE MEMORY  
deeper  
lighter  
COLOUR  
BRIGHT  
paler  
50  
70  
COLOR 70  
BRIGHT50  
lllllllll  
darker  
weaker  
stronger  
stronger  
bluish  
CONT (Contrast)  
70  
20  
0
SHARP  
TINT  
weaker  
Press the or button to  
select adjustment item  
purplish  
BBK  
(Blue background)  
ON  
ON (OFF)  
PICTURE MEMORY  
COLOR 70  
BRIGHT 50  
lllllllll  
llllll  
Note:  
* Only when the colour system is NTSC, there is  
TINT item  
Press the or button to  
adjust the level  
* If the signal being received is weaker, adjust SHARP to lower  
level to reduce the noise.  
If the signal being is stronger, adjust SHARP to higher level to  
improve the picture quality.  
PICTURE MEMORY  
lllllllll  
COLOR 70  
BRIGHT 60 llllllll  
*
If the TV signals are too weak and you can not watch the program  
normally, blue background will appear automatically to overcome  
the picture. If you insist on watching the program, you can select  
"BBK" item to shut off the blue background. We suggest you turn  
"BKK" on in ordinary circumstances.  
12  
 
Press the MENU button  
and button  
2. Sound adjustment  
Complete the following steps and you will adjust the  
sound quality.  
MENU  
PICTURE  
SOUND  
Press the MENU button to display the main  
menu. Press the or button to select  
2.1  
SOUND , then press the  
or  
button to enter  
into the sub-menu of SOUND.  
Press the or button to select your required  
sound adjustment item (the caption on the screen  
Press the or button  
to display the menu of  
sound  
2.2  
is red), then press the  
the sound quality.  
or  
button to adjust  
SOUND MEMORY  
llllll  
llllll  
BASS 50  
TREBLE 50  
Pressing (Memory mode)  
Adjustment  
Standard  
mode  
item  
Press the or button  
to select adjustment mode  
BASS  
weaker  
weaker  
stronger  
stronger  
50  
50  
TREBLE  
SOUND MEMORY  
decrease right decrease left  
llllll  
llllll  
BASS 50  
TREBLE 50  
0
BALANCE  
side sound  
on/off  
side sound  
on/off  
Off  
50  
SURROUND  
SURROUND  
weaker  
stronger  
Press the  
or button  
to adjust the level  
You can select the sound quality according to the  
programme content and personal preference.  
SOUND MEMORY  
llllll  
BASS 50  
llllllll  
TREBLE 70  
TREBLE  
Strong  
Tone quality  
SURROUND  
on  
BASS  
Strong  
Press the  
mode changes between  
STANDARD and MEMORY  
|
button  
suitable for listening  
to music  
suitable for listening  
to news, language  
standard  
weak  
off  
off  
weak  
SOUND STANDARD  
BASS 50  
TREBLE 50  
llllll  
llllll  
middle  
middle  
Note: During the process of picture and sound ad-  
justment, every time you press the button,  
|
STANDARD/MEMORY is displayed on the  
screen alternatively. When picture and tone  
quality are adjusted to your desired level,  
the mode is memory mode.  
13  
 
3. SURROUND SOUND  
SURROUND OFF  
Making use of surround sound, you can enjoy  
the dynamic sound effect that is like being  
in a music hall. To make use of surround  
sound, complete steps 2.1, 2.2 to  
Press the  
or button to  
to select SURROUND ON  
select SURROUND ON, and press the  
button to select SURROUND then press  
the  
or button to adjust its effect. To  
turn off surround sound, select  
SURROUND OFF.  
SURROUND ON  
Press button to  
select SURROUND  
4. Adjusting the volume and muting the  
sound.  
You can press the VOL  
button to  
llllll  
SURROUND 50  
adjust the volume, and you can press the  
button to mute the sound. Press the button  
again or VOL button or operate any  
item of SOUND menu, the sound is restored  
to normal.  
Press the  
button to  
increase SURROUND  
SURROUND 70 llllll  
VOLUME  
50  
MUTE  
50  
14  
 
Other functions  
1. ON Timer/OFF Timer  
With the timer, you can set the TV to turn on/off automatically  
at a preset time. In the menu of TIMER you can set: CLOCK,  
ON TIME, OFF TIME.  
menu of TIMER  
TIMER  
OFF TIME OFF  
0:00  
1.1 OFF TIME  
With the OFF timer, the TV will automatically switch to  
standby mode at a preset time.  
1.1.1  
Press the MENU button to enter into the main menu, press  
the or button to select TIMER, and press the  
button to enter into the sub - menu of TIMER  
or  
1.1.2  
Press the or button to select OFF TIME. Pressing  
the or button set ONCE/EVERY OFF TIME. Every  
time you press the or button, it will change in the  
TIMER  
OFF TIME EVERY  
10:00  
sequence of OFF EVERY ONCE OFF EVERY  
------. When the setting is ONCE or EVERY OFF  
TIME, press the or button to select time to turn off  
the set, then press the  
or  
button to set the time to  
turn off the TV, at the preset time the TV will automatically  
switch to standby mode. To cancel OFF TIME, set  
OFF TIME OFF.  
1.2 ON TIME  
With the ON timer, the TV will automatically turn on to preset  
menu of TIMER  
channel at a preset time.  
TIMER  
ON TIME OFF  
0:00  
1.2.1 Do Step 1.1.1 to enter into the sub-menu of TIMER  
1.2. 2  
Press the or button to select ON TIME.  
Pressing the or button set ONCE/EVERY ON  
TIME. Every time you press the  
will change in the sequence of OFF  
or  
button, it  
EVERY  
ONCE  
OFF EVERY......... When the setting is  
TIMER  
ONCE or EVERY ON TIME, press the or but-  
ton to select time to turn on the set, then press the  
ON TIME EVERY  
6:00  
or  
button to set the time to turn on the TV.  
or button to select  
After the setting, press the  
POS., then press the or button to select your  
desired program number.  
15  
 
1.2.3.  
Pressing the  
button set the TV into standby  
mode. At the preset time the TV will automatically  
turn on to preset channel. To cancel ON  
TIME, set ON TIME OFF.  
1.3 CLOCK  
The built-in clock employs the 24-hour system.  
Do step 1.1.1 to enter into the sub-menu of  
TIMER.  
Press the or button to select CLOCK.  
1.3.1  
TIMER  
CLOCK 10:30  
1.3.2  
Pressing the  
or  
button set the present  
hour and minute.  
Note:  
To make use of ON TIME and OFF TIME,  
set the clock firstly and check the correct  
time.  
1.4 SLEEP  
To make use of SLEEP function, press the SLP  
button every time, the letters displaying on the  
screen will change in the sequence of OFF  
120 min 110min ......10min OFF..... At the  
preset time, the TV will automatically switch to  
standby mode.  
SLEEP 30min  
2. Selecting the menu language  
You can select the menu language: ENGLISH or  
CHINESE(  
).  
2.1  
2.2  
2.3  
Press the MENU button to enter into the main  
menu, press the or button to select  
LANGUAGE.  
ENGLISH  
Press the  
or  
button to enter into the sub -  
menu. Press the or button to select  
ENGLISH or  
Press the MENU button repeatedly until the set  
exits from menu - display mode.  
16  
 
External Equipment Connections  
The following describes how to use and connect the TV with other equipment. Refer to the  
owner's manual of the other equipment to be connected as well.  
1. To Connect to AV input  
You can video equipments such as a VTR and video camera to this TV and enjoy the  
high quality picture and sound.  
If your video equipment has an S-VIDEO output terminal, connect it to the S-VIDEO input  
terminal (special S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal  
(photo type).  
17  
 
To select the input press the VIDEO button on the TV set or the AV button on the remote  
controller repeatedly until you see the corresponding input indication on the screen. To return to  
aerial input, press the AV button until it displays programme number, or press direct channel  
select button or the CH  
button.  
VIDEO 3  
VIDEO 1  
VIDEO 2  
TV  
If the colour of video input is abnormal, the colour system setting may be incorrect. Press the  
SYS button button to display COLOUR AUTO If not, press the  
appears  
or  
button until normal colour  
Note on the S-VIDEO terminal  
The S-VIDEO input terminal has priority over the video 1, video 2 VIDEO terminals on the  
rear and the video 3 VIDEO terminals on the left side. To use equipment connected to the video  
terminals, disconnect any plug from the S-VIDEO terminal  
2. To connect MONITOR output terminals  
You can connect a stereo system to the MONITOR output terminals (photo type) on the set  
to enjoy a high - quality sound from the stereo system. The MONITOR output terminals out-  
put the video and audio signals being displayed on the screen.  
18  
 
Troubleshooting  
Symptoms  
Check the following items  
No power, red indicator  
is not lit up  
.
Be sure the power cord is plugged in  
Contrast, colour, tint are not correctly adjusted  
.
.
Poor colour, poor tint  
Possible interferences of automobiles, motorcycle,  
trolley bus, neon lamps, etc.  
Spots appear on the  
screen  
.
Possible interferences of electronic interference from  
another TV set, a computer, electronics game machine,  
a broadcast station, etc.  
Stripes appear on the  
screen  
.
.
.
This may be caused by reflections from nearby  
mountains or buildings.  
Double images or  
"ghosts"  
Check the antenna direction.  
It is possible that the aerial "lead - in" is damaged  
or comes off.  
Snowy picture  
.
Check the antenna direction.  
.
The batteries may be worn out  
The remote controller  
does not work  
.
The batteries may be installed with their polarity  
reversed.  
.
When the temperature in the room is lower than  
00 C this phenomenon is normal. (When the tem-  
perature rises, the drawer will eject normally)  
The drawer of the con-  
troll buttons opens  
slowly  
The drawer of the con-  
trol buttons can not  
open  
.
.
Check the TV table is level.  
Even if the picture or the sound is normal, changes  
in the room temperature sometimes make the TV  
cabinet expand or contract, making a noise. This  
does not indicate a malfunction.  
TV cabinet creaks  
19  
 
Specifications  
~ 240V, 50Hz  
Power supply:  
Power consumption:  
Dimension(mm):  
Weight:  
200W (When the rated voltage is at AC ~ 240V, 50Hz)  
859(W) x 678.5(H) x 579(D)  
73kg  
80cm pure flat picture tube  
CRT:  
TV system & channel range  
System  
VHF  
1-12  
2-12  
2-12  
2-13  
2-12  
1-12  
CATV  
UHF  
PAL-D/K  
PAL-B/G  
PAL-I  
Z1 ~ Z37  
13-57  
21-69  
21-69  
14-79  
21-69  
21-69  
X ~ Z + 2, S1 ~ S41  
NTSC-M US  
SECAM-B/G  
SECAM-D/K  
A-6-A-l,A-W,AA-F’FF  
X ~ Z + 2, S1~S4  
Colour system:  
Sound system :  
PAL/SECAM/4.43NTSC/3.58NTSC  
NICAM728: B/G 5.5/5.85  
I 6.0/6.552  
D/K 6.5/5.85  
IGR(2 - Carrier) : B/G 5.5/5.74  
13W + 13W  
Sound output:  
Accessories :  
one remote controller  
Note : Design and specifications are subject to change without notice.  
20  
 
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL:(02)9313 7111  
FAX:(02)9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
604-34F83-00  
 

Miller Electric Welder DWF3 User Manual
MPC Clock OM 20000072 User Manual
MTD Trimmer MP426CS User Manual
Multiquip Model Vehicle GX270UT2QA2 9HP User Manual
Nikon Digital Camera 26483 User Manual
Optiview Security Camera 22XSPD User Manual
Oregon Scientific Clock BARM839 User Manual
Panasonic Answering Machine KX TG6700 User Manual
Panasonic Microscope Magnifier H H020A User Manual
Panasonic Telephone KXTG4744B User Manual